1.8" and 2.5" Solid State Flash Drive (SSD) für Standard
und Industrial Grade Applications

Solid State Drive Produkt Information (PDF)

	Industrial Grade	Industrial Grade	Standard Grade	Industrial Grade
	1.8" IDE	2.5" IDE	2.5" SATA II	2.5" SATA II
Application	High Performance	High Performance	Low Cost Solution	High Performance
Connector	IDE/PATA	IDE/PATA	SATA II	SATA II
Memory Type	SLC NAND	SLC NAND	MLC NAND	SLC NAND
303Pro Features	—	optional	—	—
Status	available	available	available	available
Capacity	128 MB - 32 GB	128 MB - 32 GB	8 GB - 256 GB	4 GB - 128 GB
Endurance Cycles	>2 Milllion	>2 Milllion	100k	> 2 Million
MTBF (Hours)	4 Million	4 Million	200k	4 Million
Warranty	5 Years	5 Years	3 Years	5 Years
Standard Temp.	0°C - 70°C	0°C - 70°C	0°C - 70°C	0°C - 70°C
Extended Temp.	-45°C - +90°C	-45°C - +90°C	—	-45°C - +90°C
Sequential Read	35 / 20* MB/sec	35 / 20* MB/sec	135 MB/sec	145 MB/sec
Sequential Write	20 / 10* MB/sec	20 / 10* MB/sec	45 MB/sec	110 MB/sec
Random Read	30 /20* MB/sec	30 / 20* MB/sec	65 MB/sec	75 MB/sec
Random Write	3.5 / 3* MB/sec	3.5 / 3* MB/sec	13 MB/sec	20 MB/sec
Shock/Vibration	3000G/20G	3000G/20G	3000G/20G	3000G/20G
Error Correction	4 bit SC ECC	4 bit SC ECC	8/15 bit BCH ECC	8/15 bit BCH ECC
UDMA	up to Mode 4	up to Mode 4	up to Mode 5	up to Mode 5
* for capacity 1GB and below

Features P-ATA-SSD:
- Jumper for Master/Slave/Cable select, additional Jumper to set SSD to Read only mode
- LED for operation display
- Supports True IDE Mode
- Supports ATA PIO Mode 0-4
- Data retention: > 10 years
- Unique Electronic Serial Card ID
- Supports Traceability Barcode
- Solid State Design With No Moving Part
- 4 Bit ECC, High Data Reliability (< 1 Error in 10¹⁴ Bits read)
- Dynamic wear leveling
- Bad block management
- customized Versions possible for >1000 pieces

Features 2.5" S-ATA SSD:
- Industry Standard 2.5" Serial ATA (SATA) Solid State Disk
- Supports SATA I (1.5Gbits/sec) and SATA II (3.0Gbits/sec) transfer rates
- Supports ATA PIO Mode 0-4
- Supports Multiword DMA Modes 0-2
- Locked BOM Control
- Traceability Barcode
- Unique Electronic Serial card ID
- Solid State Design with No Moving Parts

-303Pro Serie
- ATA Security Feature Set: Password set/disable, Unlock, Unerase
- CTPurge: Erase only, Erase and Overwrite with random data once or n-times
  according to high standard specifications.
- CTLock: Lock Card to Host System
- Write Protect: Multiple Methods (Hardware/Software)

Bestellinformation für P-ATA Solid State Flash Drives:
KDXFY-303ZA (Industrial Grade)

Bestellinformation für S-ATA Solid State Flash Drives:
KDXF-110-aa (Standard Grade)
KDXFY-602 (Industrial Grade)

Zusätzliche Unterlagen:

Solid State Drive Manual and Brochures
S-ATA SSD Product Manual
S-ATA SSD Product Brief
P-ATA SSD Product Brief 3xxPro Revision
Application Notes

RoHS