Home
Ethernet ICs
 
logos Davicom Melexis Ubec Wiznet Taimag Cactus Home
   German Flag   |   Home  
Products        Service        Downloads        Contact        Company
   

ISA to Ethernet Controller with 8/16/32 Bit Processor I/F and integrated 10/100 PHY

The DM9000 is a fully integrated and cost-effective single chip Fast Ethernet MAC controller with a general processor interface, a 10/100M PHY and 4K Dword SRAM. It is designed with low power and high performance process that support 3.3V with 5V tolerance. The DM9000 also provides a MII interface to connect HPNA device or other transceivers that support MII interface. The DM9000 supports 8-bit, 16-bit and 32-bit uP interfaces to internal memory accesses for different processors. The PHY of the DM9000 can interface to the UTP3, 4, 5 in 10Base-T and UTP5 in 100Base-TX. It is fully compliant with the IEEE 802.3u Spec. Its auto-negotiation function will automatically configure the DM9000 to take the maximum advantage of its abilities. The DM9000 also supports IEEE 802.3x full- duplex flow control. This programming of the DM9000 is very simple, so user can port the software drivers to any system easily.

Features
- 100 pinLQFP
- 0.35 µm Process
- Integrated 10/100 Transceiver
- up to 48 Mhz system clock
- Processor Interface: Byte/word/Dword
- MII and reverses MII Interface
- SPI EEPROM Interface
- 4K Dword SRAM
- 0°C - +70°C Temperature Range

Ordering Information:
Product RoHs Temp.-Range Package max. Current Status
DM9000 EP yes 0°C - +70°C 100pin LQFP 100 mA available
Not to be recommended for new designs.
Alternatives: DM9000A, DM9000B, DM9010, DM9010B

Additional Documents:

DM9000 Data Sheet and Application Circuit
(Link to Davicom Homepage)

General Layout Guide
DM9000 Application Note
DM9000 Layout Guide
DM9000 Errata Sheet

Comparison Table DM90x0 Serie
DM9000 to DM9000A Changes
DM9000 to DM9000A driver programming difference list
DM9000 µP and ISA Programming Guide
DM9000EP IBIS Modell
DM9000 Eagle Files
Connecting two devices without transformers
DM9000 and DM9010B Co-layout
DM9000 on RMI AU1250 Driver Installation
Design Hint Connection RJ45 - Center Tabs to PHY

WinCE E-Boot Driver
Scourcecode for Windows CE, VX Works
on request.

RoHs and further information:
Material Safety Data Sheet - Ink Marking
Material Safety Data Sheet - Laser Marking
RoHs Compliance Information
Recommended Soldering
MSL Level 3 according to IPC/JEDEC J-STD-020C
Customs clearance number: 85423190 according to
Liste vom Statistischen Bundesamt
valid from 01.01.2007

 

 

Davicom

dm9000

dm9000 evb
DM9000 Evaluation Board

rsk board

RSK Adapter Kit

 

Related Products
and Accessories

Davicom:
DM9000A MAC+ PHY
DM9006 2-Port Switch
DM9010 MAC + PHY

DM9016 3-Port Switch
DM9161 Single PHY
DM9161A Single PHY



Wiznet:
W5100 TCP/IP Hardwired
Stack + PHY


Taimag:
Transformer
RJ45 Jacks

 
DACOM West GmbH | Schallbruch 19-21 | D-42781 Haan | Tel.: +49 (0)2129 376-200 | Fax: +49 (0)2129 376-209