ISA to Ethernet Controller with 8/16 Bit Processor I/F and integrated
10Base-T PHY

The DM9008 Ethernet controller is a highly integrated design that provides all Media Access Control (MAC) and Encode-Decode (ENDEC) functions in accordance with the IEEE 802.3 standard. Network interfaces include 10BASE5 or 10BASE2 Ethernet via the AUI port and 10BASE-T via the Twisted-pair. The DM9008 Ethernet controller can interface directly to the PC-AT ISA bus without any external device. The interface to PC-AT ISA bus is fully compatible with NE2000 Ethernet adapter cards, so all software programs designed for NE2000 can run on the DM9008 card without any modification.
Microsoft's Plug and Play and the jumperless software configuration function are both supported. The capability of the PnP and Non-PnP mode auto-switch function allows users to configure network card. No jumpers or switches are needed to set when using either the PC or PnP function. The integrated 8Kx16 SRAM and 10BASE-T transceiver make DM9008 more cost-effective.

Additional Documents:

DM9008 Data Sheet and Application Circuit (Link to Davicom Homepage)

General Layout Guide
DM9008 Schematic Diagram1
DM9008 Schematic Diagram2
Connecting two devices without transformers
Design Hint Connection RJ45 - Center Tabs to PHY

RoHs and further information:
Material Safety Data Sheet - Ink Marking
Material Safety Data Sheet - Laser Marking
RoHs Compliance Information
Recommended Soldering
MSL Level 3 according to IPC/JEDEC J-STD-020C
Customs clearance number: 85423190 according to
Liste vom Statistischen Bundesamt valid from 01.01.2007