|
ISA to Ethernet Controller
with 8/16 Bit Processor I/F and integrated 10 Base-T
Auto MDI-X PHY
The DM9008C is a fully integrated and cost-effective
low pin count Ethernet controller with a general processor
interface, a Medial Access Control (MAC), a 10Base-T
PHY and 16K Byte SRAM. It is designed with low power
and high performance process that support 3.3V with
5V IO tolerance.
The DM9008C supports 8-bit and 16-bit data interfaces
to internal memory accesses for various processors.
The DM9008C also supports full duplex mode. The PHY
of the DM9008C can interface to the UTP3, 4, 5 in 10Base-T
that is fully compliant with the IEEE 802.3 Spec. The
HP Auto-MDIX function of PHY is also supported to improve
the media connection in convenience.
Features
- 48 pinLQFP
- 0.25µm Process
- Auto-MDIX 10Base-T Transceiver
- IP/TCP/UDP checksum generation and checking
- up to 100 MHz system clock
- processor Interface: Byte/word
- supports Early TX
- integrated 3.3V to 2.5V converter
- up to 6 GPIO Pins possible
- 16k SRAM
- 0°C - +70°C Temperature Range
| Ordering Information: |
| Product |
RoHs |
Temp.-Range |
Package |
max. Current |
Status |
| DM9008C EP |
yes |
0°C - +70°C |
48pin LQFP |
170 mA |
available |
Additional Documents:
DM9008C
Data Sheet and Application Circuit (Link to Davicom
Homepage)
General
Layout Guide
DM9008C
Layout Guide
DM9008C Circuit
OrCad®-File
Comparison DM90x0
Serie
Davicom DM9000A
vs SMSC
DM9000 to
DM9000A Changes
DM9000 to
DM9000A driver programming difference list
DM9000A
DM9010 SROM programming
DM9000
µP and ISA Programming Guide
Connecting two
devices without transformers
Design Hint Connection
RJ45 - Center Tabs to PHY
RoHs and further information:
RoHs Compliance Information
Recommended
Soldering
Customs clearance number: 85423190 according to
Liste vom Statistischen Bundesamt valid from
01.01.2007
|
| Home
