Trade Shows

26.02. - 28.02.2019, Nuremberg






The Melexis MLX91206 opens new opportunities for contactless current sensing in renewable energy applications, hybrid electric vehicle (HEV) and electric vehicle (EV). The device is a customer programmable monolithic sensor IC featuring Triaxis® technology. It enables the user to construct small, economical current sensor solutions with fast response times. The chip directly monitors the current flowing in an external conductor such as a bus bar or printed circuit board (PCB) track.

Current Sensing

The contactless current sensor consists of a complementary metal oxide semiconductor (CMOS) Hall effect sensor with a thin ferromagnetic layer structured on its surface. The integrated magnetic concentrator layer (IMC-Hall®) provides a high magnetic gain which significantly increases the signal to noise ratio of the sensor.
The current sensor is particularly appropriate for DC and/or AC current measurements up to 90kHz with ohmic isolation, very low insertion loss, fast response time, small package size and low assembly cost requirements.

High Bandwidth

The MLX91206 current sensor is automotive qualified and senses the current by converting the magnetic field generated by currents flowing through a conductor to a voltage, which is proportional to the field. There is no upper limit to the level of current that can be measured because the output level is dependant on the conductor size and distance from the sensor.

Fully Custom Programmable

The transfer characteristic of the MLX91206 is fully customer programmable (offset, gain, clamping levels and more). The output is selectable between analog and pulse-width modulation (PWM).
The linear analog output permits use of the sensor in applications where a very fast response of <10 µsec is required, whereas the PWM output is used for applications where low speed but high output signal robustness is required or where a digital signal is desired as input to a micro. An additional thermometer output signal helps to monitor the ambient temperature in the application.

Product Versions

  • MLX91206CAL: Low magnetic field (10mT)
  • MLX91206CAH: High magnetic field (25mT)


Features Application examples
  • Programmable Hall-Effect current sensor
  • Integrated Magnetic Concentrator (IMC-Hall®)
  • Factory programmable variants
    (magnetic sensitivity range)
  • Fully customer programmable
    (offset, gain, clamping levels and more)
  • Programmable Sensitivity ranges: 
    200 to 700mV/mT & 80 to 330mV/mT
  • Linear output voltage proportional to a magnetic field
  • Selectable outputs:
    • Analog ratio-metric output
    • PWM output with 12 bit resolution
  • Thermometer output
  • Large Bandwidth from DC to 70kHz typical
  • Fast response time: 8µs typical
  • Wide temperature range from -40°C to 150°C (Code L)
  • Operating voltage from 4.5V to 5.5V
  • SOIC-8 SMD package
  • DC/AC (inverter) converter
  • AC/DC Converters
  • DC/DC switched mode power supply
  • BLDC motor (phase current)
  • Smart fuse (over-current detection)
  • Battery Management
  • Automotive applications 
  • Industrial and Robotics 
  • Home and building automation 
  • White goods and household appliances