Trade Shows
 |
| 26.02. - 28.02.2019, Nuremberg |
Diese Produkte erfüllen die Anforderungen zur Reduzierung des Energiebudgets und der Platzauslastung. Zeitgleich werden Aspekte der funktionalen Sicherheit und der Systemflexibilität beachtet.
Latch and Switch - 2 wire sensors
MLX92221 Latch 2-wire latching Hall-effect sensor (2nd Gen) - High accuracy
Melexis’ Latch & Switch sensors use an innovative magnetic technology that allows the measurement of the lateral magnetic flux component.
MLX92223 Latch 2-Wire Hall-effect latch IC with voltage controlled current source
The MLX92223 is a PCB-less 2-wire Hall-effect latch IC with integrated passives (emulates a 392Ω resistor and decoupling capacitor), making it compatible with industry-standard ECUs without the need for any additional external components.
MLX92241 Switch 2-wire Hall-effect ASIL A sensor switch IC (2nd Gen)
The MLX92241 IC is the new generation factory programmable Hall-effect switch IC designed in mixed signal submicron CMOS technology.
Latch and Switch - Dual hall sensors
MLX90224 Latch Dual Hall-effect latch IC
The MLX90224 series are dual Hall-effect latch ICs. It includes two Hall-effect latch functions of which typical thresholds are ± 2.0mT.
MLX92362 Hall based programmable SOI floating switch
The MLX92362 is a revolutionary Hall based floating switch. With Its isolated output, it only requires power to directly drive a load.
MLX92251 Latch Dual Hall-effect latch IC with speed and direction - Medium sensitivity
The MLX92251 is a second generation Hall-effect dual latch IC designed in mixed signal CMOS technology. It integrates a voltage regulator, two Hall sensors with advanced offset cancellation system and two open-drain output drivers, all in a single package.
MLX92352 3D Triaxis dual latch & switch (programmable)
The MLX92352 is the most versatile 3-axis latch & switch targeting relative position and speed sensing. This standalone PCB-less solution offers dual quadrature outputs. The MLX92352 is end of line programmable.
MLX92255 Latch Dual Hall-effect latch IC with two speed outputs - Low voltage
The MLX92255 is a second generation Hall-effect dual latch IC designed in mixed signal CMOS technology. It integrates a voltage regulator, two Hall sensors with advanced offset cancellation system and two open-drain output drivers, all in a single package.
Latch and Switch - 3 wire sensors
MLX92214 3-wire general-purpose latch
The MLX92214 is a 3-wire latch designed for DC/BLDC motors, specially adapted to power tools, PCs, servers and home appliance applications.
MLX92212 (LSE-ABA) Switch 3-wire Latching sensor - Low voltage
The MLX92212 Hall-effect sensors deliver non-contact position sensing in many challenging environments.
MLX92211 Digital Hall latch IC in CMOS technology (2nd Gen)
Melexis’ Latch & Switch sensor ICs use an innovative magnetic technology that allows the measurement of the lateral magnetic flux component.
MLX92212 (LSE-AAA) Switch 3-wire Latching sensor - Low voltage
The MLX92212 Hall-effect sensors deliver non-contact position sensing in many challenging environments.
MLX92231 Switch Unipolar 3-wire Hall proximity sensor
The MLX92231 targets applications that require Hall-effect switch magnetic characteristics. It features a low voltage capability allowing to interface with microcontrollers and other digital ICs placed on supply lines at <3V.
MLX92216-MLX92217 Hall-effect switch - ultra low power consumption
The MLX92216 & MLX92217 are ultra low power Hall effect switches. 1 microwatt power consumption and narrower tolerances lead to a predictable power budget. They detect open or closed position in IoT, industrial & white goods.
Latch and Switch - General purpose sensors
US1881 Hall-effect sensor latch - High sensitivity
The US1881 is a Hall-effect latch designed in mixed signal CMOS technology. It integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
US1883 Hall-effect sensor latch - Medium sensitivity
The US1883 is a Hall-effect latch designed in mixed signal CMOS technology.
US2881 Latch Bipolar Hall-effect switch - High sensitivity
The US2881 is a bipolar Hall-effect switch designed in mixed signal CMOS technology that integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
US2882 Latch Bipolar Hall-effect sensor switch - Very high sensitivity
The US2882 is a bipolar Hall-effect switch designed in mixed signal CMOS technology that integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
US2884 Latch Bipolar Hall-effect sensor latch - Very high sensitivity
The US2884 is a bipolar Hall-effect switch designed in mixed signal CMOS technology that integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
US3881 Hall-effect latch sensor - Low voltage and high sensitivity
The US3881 is a Hall-effect latch designed in mixed signal CMOS technology that integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
US4881 Bipolar Hall-effect switch - Low voltage and very high sensitivity
The US4881 is a bipolar Hall-effect switch designed in mixed signal CMOS technology that integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
MLX92215 3-wire Hall-effect sensor IC (2nd Gen) - Multi-purpose portfolio
The MLX92215 is the second generation Hall-effect latch IC designed in mixed signal CMOS technology for industrial, medical, and consumer applications.
US5681 Unipolar Hall-effect switch - High sensitivity
The US568x is a product family that provides a high sensitive unipolar Hall-effect switch solution designed in mixed signal CMOS technology.
US5682 Unipolar Hall-effect switch - High sensitivity
The US568x is a product family that provides a high sensitive unipolar Hall-effect switch solution designed in mixed signal CMOS technology.
US5683 Unipolar Hall-effect switch - High sensitivity
The US568x is a product family that provides a high sensitive unipolar Hall-effect switch solution designed in mixed signal CMOS technology.
US5781 Unipolar Hall-effect switch - Medium sensitivity
The US5781 is a unipolar Hall-effect switch designed in mixed signal CMOS technology that integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
US5782 Unipolar Hall-effect switch - Medium sensitivity
The US5782 is a unipolar Hall-effect switch designed in mixed signal CMOS technology that integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
US5881 Unipolar Hall-effect switch - Low sensitivity
The US5881 is a low sensitive unipolar Hall-effect switch designed in mixed signal CMOS technology that integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
Latch and Switch - μPower Sensors
MLX92213 Hall-effect magnetic sensor - Low power consumption
The MLX92213 features an ultra-sensitive Hall-effect latch operating from 1.6 V to 3.6 V. The output is a Push-Pull type so that an external pull-up resistor is not needed for proper operation, hence reducing PCB component count.
MLX90248 Omnipolar on/off Hall-effect switch IC
The micropower feature makes the MLX90248 suitable for battery-powered device as it combines low voltage operation and low current consumption.
Latch and Switch - Customer programmable sensor
MLX92242 2-wire Hall-effect switch/latch IC
The MLX92242 is a highly integrated Hall-effect switch/latch IC that contains a voltage regulator as well as Hall sensing element, and a current sink-configured output driver, all in a single compact, low-profile package
MLX92232 Programmable 3-wire Hall-effect sensor IC
The MLX92232 is the first end-of-line programmable sensor IC in a family of high accuracy devices.
MLX92292 3-wire ASIL B Hall sensor IC with lateral sensing
The MLX92292 represents a new way of sensing. This IC delivers switch and latch functions, but unlike existing products on the market it can determine the presence of magnetic fields that are lateral, not just orthogonal, to it.
MLX92232 Dual die Programmable 3-wire Hall-effect sensor IC
The MLX92232 is the first end-of-line programmable sensor IC in a family of high accuracy devices.
Latch and Switch - μPower Sensors for Automotive
MLX92292 3-wire ASIL B Hall sensor IC with lateral sensing
The MLX92292 represents a new way of sensing. This IC delivers switch and latch functions, but unlike existing products on the market it can determine the presence of magnetic fields that are lateral, not just orthogonal, to it.
Vergleichstabelle
| Latch and Switch - 2 wire sensors | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Part No. | Typical Bop/Brp | TC | Ioff | Supply Voltage | Output Type | Package & pople active | Magnetic polarity | ICAP | IOS26262 | AXIS | |||||
| mT | ppm/°C | mA | V | TSOT | UA | ||||||||||
| Latch | 0,8/ -0,8 - 11,8/ -11,8 | -2000-0 | 3,3/6 | 2,7 - 24 | current source | ● | ● | Direct | ● | ● | Bx | ||||
| -10/ 10 | 3,3/6 | 3,8 - 16 | Voltage controlled current source | ● | Direct | ● | ● | ||||||||
| Switch | -3,8/ -3,8 - 20/ 18 | -2000-0 | 3,3/6 | 2,7 - 24 | current source | ● | ● | Direct/ Inverted | ● | ● | |||||
| Latch and Switch - Dual hall sensors | |||||||||||||||
| Part No. | Typical Bop/Brp | TC | Idd | Supply Voltage | Output Type | Package & pole active | Axis | ||||||||
| mT | ppm/°C | mA | V | TSOT | VA | ||||||||||
| Latch | 2,5/ -2,5 | 7,5 | 4,5 - 16 | Speed&Speed | ● | 2x Bz | |||||||||
| 2,5/ -2,5 -7,5/ -7,5 | -1100/ 0 | 4,5 | 2,7 - 24 | Speed&Direction | ● | 2x Bz | |||||||||
| 3/ -3 | -1800 | 5 | 3,8 - 24 | Speed& Speed + fd | ● | 2x Bz | |||||||||
| Latch and Switch - 3 wire sensors | |||||||||||||||
| Part No. | Typical Bop/Brp | TC | Idd | Supply Voltage | Output Type | Package & pole active | Magnetic polarity | Axis | |||||||
| mT | ppm/°C | mA | V | TSOT | UA | ||||||||||
| Switch | -13,5/ -8,5 - 66/ 50 | -2000 - 0 | 3 | 2,7 - 24 | Open Drain | ● | ● | Direct/ Inverted | Bx | ||||||
| 12 /10,5 | 2,2 | 2,5 - 5,5 | Open Drain | ● | Direct | ||||||||||
| Latch | -0,5/ 0,5 - 14,9/ -14,9 | -2000 - 0 | 3 | 2,7 - 24 | Open Drain | ● | ● | Bx | |||||||
| 2/ -2 | 2,2 | 2,5 -5,5 | Open Drain | ● | |||||||||||
| 2/ -2 | 2,2 | 2,5 -5,5 | Open Drain | ● | |||||||||||
| Latch and Switch - General purpose sensors | |||||||||||||||
| Part No. | Typical Bop/Brp | TC | Idd | Supply Voltage | Output Type | Package & pole active | |||||||||
| mT | ppm/°C | mA | V | TSOT | UA | ||||||||||
| Latch | 5/ -5 | 3 | 3,5 - 24 | Open Drain | ● | ● | |||||||||
| 14/ -14 | 3 | 3,5 - 24 | Open Drain | ● | |||||||||||
| 3/ -3 | 3 | 3,5 - 24 | Open Drain | ● | ● | ||||||||||
| 3/ -3 | 3 | 3,5 - 24 | Open Drain | ● | |||||||||||
| 3/ -3 | 3 | 3,5 - 24 | Open Drain | ● | ● | ||||||||||
| 5/ -5 | 3 | 2,2 - 18 | Open Drain | ● | ● | ||||||||||
| 3/ -3 | 3 | 2,2 - 18 | Open Drain | ● | ● | ||||||||||
| 3/ -3 | -2000/ -1100 | 3 | 2,7 - 24 | Open Drain | ● | ||||||||||
| Switch | 5,5/ 3,5 | 3 | 3,5 - 24 | Open Drain | ● | ||||||||||
| 5,5/ 3,5 | 3 | 3,5 - 24 | Open Drain | ● | |||||||||||
| 5,5/ 3,5 | 3 | 3,5 - 24 | Open Drain | ● | |||||||||||
| 12/ 7,5 | 3 | 3,5 - 24 | Open Drain | ● | ● | ||||||||||
| 12/ 7,5 | 3 | 3,5 - 24 | Open Drain | ● | |||||||||||
| 25/ 20 | 3 | 3,5 - 24 | Open Drain | ● | ● | ||||||||||
| Latch and Switch - μPower Sensors | |||||||||||||||
| Part No. | Typical Bop/Brp | TC | Idd | Supply Voltage | Output Type | Package & pole active | |||||||||
| mT | ppm/°C | mA | V | TSOT | UA | UTQFN | VA | ||||||||
| Latch | 2/ -2 | 36 μA | 1,6 - 3,6 | Push Pull | ● | ||||||||||
| Omnipolar Switch | 3,5/ 2,5 | 3 μA | 1,6 - 3,6 | Open Drain | ● | ● | |||||||||
| Latch and Switch - Customer programmable sensor | |||||||||||||||
| Part No. | Typical Bop/Brp | TC | Ioff | Supply Voltage | Output Type | Package & pople active | ICAP | IOS26262 | AXIS | ||||||
| mT | ppm/°C | mA | V | TSOT | UA | ||||||||||
| 2-Wire | -40...40 / -100...100 | 0-2000 | 3,3/ 6 | 2,7 - 24 | Current source | ● | ● | ● | A | Bx | |||||
| 3-Wire | -40..40 / -80..80 | 0-2000 | 3 | 2,7- 24 | Open Drain | ● | ● | Bx | |||||||
| -40..40 / -90..90 | 0-2200 | PROGR | 3,3 - 18 | Open Drain | ● | ● | B | Bx | |||||||
| Dual Die | -80..80 | 3 | 2,7 - 24 | Open Drain | VA | 2x Bz | |||||||||
| -90...90 | 0-2200 | PROGR | 3,3 - 18 | Open Drain | SOIC8 | B | 2x Bz | ||||||||
| Latch and Switch - μPower Sensors for Automotive | |||||||||||||||
| Part No. | Typical Bop/Brp | TC | Ioff | Supply Voltage | Output Type | Package & pople active | Magnetic polarity | Options | Axis | ||||||
| mT | ppm/°C | mA | V | TSOT | UA | Power & diag mode | Top (ms) | Tick repetition | Tick duration | ISO26262 | |||||
| 3-wire Switch | -16,85/ -17,85 - 13,5/ 8,5 | -2200 - 0 | 0,007 - 3 | 3,3 - 18 | Open Drain | ● | ● | Direct/ Inverted | uNoDiag/ TickMsg/ OutOnMsg/ FIddMsg | 0,2 - 60 | Top | 128 | B/ A | Bx | |
