
GOODRAM Industrial Flash Memory – High-Reliability Storage
goodram industrial storage products utilize the latest technologies to ensure complete reliability up to the specified TBW (Total Bytes Written) value. NAND Flash based memory devices form a distinct group of products with a range of different interfaces and applications. Depending on the type of NAND flash used, these products differ in terms of durability, speed and capacity. All of them, however, have advanced mechanisms to ensure data integrity. goodram industrial currently offers solutions based on SLC, pSLC, MLC, 3D TLC and 3D pSLC NAND Flash.

eMMC
eMMC (Embedded MultiMediaCard) is a type of compact memory device used mainly in portable devices. Unlike removable microSD/SD cards or SSD drives, the eMMC standard refers to a non-volatile memory chip embedded in the device’s motherboard. eMMC is a compact storage device that is physically integrated into the application. Thanks to its small size, it can be successfully used in devices where SSD drives cannot be installed due to limited space.
Size: 609.02 KB
Size: 601.79 KB
Size: 612.91 KB
Size: 616.63 KB

microSD/SD
microSD and SD memory cards are available in three capacity standards: SDSC (Standard Capacity), SDHC (High Capacity) and SDXC (eXtended Capacity) with bus support up to UHS-I. Selected models have an additional SPI interface. Small dimensions, low power consumption, a wide range of available capacities (from 128 MB to 256 GB) and a wide choice of NAND types (SLC, pSLC, MLC, 3D TLC and 3D pSLC).
Size: 679.09 KB
Size: 642.29 KB
Size: 653.77 KB
Size: 678.54 KB
Size: 630.04 KB
Size: 607.03 KB
Size: 607.94 KB
Size: 614.76 KB

SATA III 2,5”
2.5” SATA is the most common solid state drive form factor. All SSDs can be configured with 3D TLC, 3D pSLC, MLC, pSLC and SLC NAND flash memory. They provide data transfer speeds of up to 550 MB/s, low power consumption and advanced power management modes. Thanks to reliability resulting from the absence of moving parts and low power consumption, solid state drives are ideal for both desktop and mobile applications.
Size: 741.87 KB
Size: 764.66 KB
Size: 751.34 KB
Size: 746.37 KB
Size: 763.41 KB
Size: 389.97 KB

mSATA
mSATA SSD is a solid state drive form factor that can be mounted directly on the motherboard. It is 80% smaller than 2.5”, so it takes up minimal space. Compatibility with the SATA I, II and III standards means that these devices can be installed in any device with an mSATA port. Like the entire SSD range, the absence of moving parts and low power consumption make it an ideal choice as a storage medium in mobile systems.
Size: 866.47 KB
Size: 893.08 KB
Size: 914.97 KB
Size: 859.44 KB
Size: 493.88 KB

M.2 NVMe
M.2 is another type of SSD with a SATA or NVMe interface. An M.2 SATA solid state drive can be mounted directly on the motherboard. It can be configured with 3D TLC, 3D pSLC, MLC, pSLC and SLC NAND memory, and the printed circuit board assembly (PCBA) can be supplied in two sizes: 42 x 22 mm and 80 x 22 mm. A small footprint, the absence of moving parts and low power consumption make the M.2 SATA SSD an excellent solution for mobile applications.
Size: 354.16 KB
Size: 324.56 KB
Size: 340.32 KB

CFast
CFast cards comply with the PCMCIA I or II standards with a SATA interface. The card controller, functionally compatible with typical SATA SSD controllers, provides low power consumption and data transfer speeds of up to 550 MB/s. Other features include S.M.A.R.T., advanced power management methods and DRAM cache memory. CFast is available with 3D TLC, 3D pSLC, MLC, pSLC and SLC NAND memory, and capacity may depend on the technology used.
Size: 741.5 KB
Size: 726.97 KB
Size: 746.07 KB
Size: 754.14 KB
Size: 372.57 KB

CFexpress
CFexpress cards are the latest solution supported by the Compact Flash Association (CFA), capable of meeting the toughest requirements of industrial customers. Offering excellent performance and broad compatibility, Goodram’s CFexpress™ Type B card also gives users a wide choice of capacities.

