+49 (0) 2129 376-200 This email address is being protected from spambots. You need JavaScript enabled to view it.

Select your language

WIZnet TCP/IP Chips & MCUs for Embedded Ethernet

WIZnet’s hardwired TCP/IP controllers and MCUs enable reliable Ethernet connectivity for embedded systems, industrial automation and IoT applications. Hardware-based processing of the TCP/IP stack reduces the load on the host processor and minimises the software overhead for network communication. The portfolio comprises Ethernet controllers with integrated TCP/IP, MAC and PHY, as well as MCU-based solutions for compact embedded designs. Depending on the series, interfaces such as SPI and support for IPv4 and IPv6 are available. Typical applications include industrial control systems, sensor technology, gateways, smart metering, building automation, remote monitoring and networked IoT devices.

TCP/IP Hardwired-Chips

Wiznet W6100

W6100

W6100 is a hardwired Internet controller chip supporting IPv4/IPv6 dual stack by adding IPv6 functions on the basis of WIZnet’s patented hardwired TCP/IP core technology. W6100 supports TCP/IP protocols such as TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, ARP and PPPoE.

Datasheet
Wiznet W5500

W5500

The W5500 chip is a Hardwired Internet controller with an integrated full TCP/IP stack, enabling Internet connectivity via SPI with up to 80MHz speed. It combines 10/100 Ethernet MAC and PHY for stable connectivity and supports protocols like TCP, UDP, IPv4, among others.


Datasheet
Wiznet W5300

W5300

W5300 is a 0.18 μm CMOS technology single chip into which 10/100 Ethernet controller, MAC, and TCP/IP are integrated. W5300 is designed for Internet embedded applications where easy implementation, stability, high performance, and effective cost are required.

Datasheet
Wiznet W5200

W5200

The W5200 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier internet connection for embedded systems using SPI (Serial Peripheral Interface). W5200 suits best for users who need Internet connectivity for application that uses a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC and PHY.

Datasheet
Wiznet W5100S

W5100S

W5100S designed with Hardwired TCP/IP, WIZnet Technology, is an embedded Internet Controller Chip. W5100S supporting Full Hardwired, Ethernet MAC (Media Access Control), and 10Base-T/100Base-TX Ethernet PHY is Internet Connectivity One-chip Solution for Internet Protocol (TCP/IP).

Datasheet
Wiznet W5100

W5100

The W5100 is a full-featured, single-chip Internet-enabled 10/100 Ethernet controller designed for embedded applications where ease of integration, stability, performance, area and system cost control are required.


Datasheet
Wiznet W3150A+

W3150A+

The W3150A+ is an LSI of hardware protocol stack that provides an easy, low-cost solution for high-speed Internet connectivity for digital devices by allowing simple installation of TCP/IP stack in the hardware.



Datasheet

TCP/IP Hardwired-MCUs

Wiznet W7500P

W7500P

The IOP4IoT W7500P chip is the one-chip solution which integrates an ARM Cortex-M0, 128KB Flash, hardwired TCP/IP core for various embedded application platform, 10/100 Ethernet MAC and PHY, and especially internet of things.

Datasheet
Wiznet W7500

W7500

The IOP4IoT W7500 chip is the one-chip solution which integrates an ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core for various embedded application platforms. The TCP/IP core is a market-proven hardwired TCP/IP stack with an integrated Ethernet MAC.

Datasheet

Additional features:

- Software compatible with W5100
- Maximum 4 independent hardware sockets
- 8Kb TX and 8Kb RX buffers
- Power Down and WOL
- 10 / 100BaseTX MDI-X PHY
- Temperature range: -40 ° C - 85 ° C

The W5100S is available in a 48 pin LQFP & QFN package. Volume price at 10k is 1.00 EUR.
The new W6100 supports with it´s dual stack IPv4 and IPv6 and is pin compatible to W5100S.

Wiznet's new W5100S is a TCP / IP hardwired Ethernet controller that provides cost-effective Ethernet connectivity through SPI and 8-bit interfaces. With the integration of TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE as well as MAC / PHY, you do not need a software stack and can connect sensors and IoT devices to networks with a simple SOCKET program with minimal software effort.

Find the Right WIZnet Ethernet Solution for Your Application

Developing an embedded, IoT or Industrial Ethernet system? DACOM West supports you in selecting the right WIZnet TCP/IP controller or MCU.

Tristan Friend
Tristan FriendLine Manager ConnectThis email address is being protected from spambots. You need JavaScript enabled to view it.
T: +49 (0) 2129 376-208
Please type your full name.
Invalid email address.
Invalid Input
Invalid Input
Invalid Input
GDPR(*)
GDPR
Invalid Input