DM9000A: MAC/PHY Controller mit ISA & 8/16 Bit Prozessor Interface
Features
• 48 pin LQFP Package
• current consumption 52mA + 40mA transformer
• 0.25 µm Process
• Integrated 10/100 Auto MDI-X Transceiver
• Up to 100MHz system clock
• compatible to IEEE802.3u
• IP/TCP/UDP checksum generation and checking
• supports Early TX
• 4k Dword SRAM
• Temperature Range: 0°C to 70°C
• Integrated 3.3V to 2.5V converter
• Processor Interface: Byte/Word/Dword
Block Diagam DM9000A
The DM9000A is a fully integrated and cost-effective low pin count single chip Fast controller with a general processor interface,a 10/100M PHY and 16K Byte SRAM.
It is designed with low power and high performance process that support 3.3V with 5V IO tolerance. The DM9000A supports 8-bit and 16-bit data interfaces to internal memory accesses for various processors. The PHY of the DM9000A can interface to the UTP3, 4, 5 in 10Base-T and UTP5 in 100Base-TX with AUTO-MDIX.
It is fully compliant with the IEEE 802.3u Spec. Its auto-negotiation function will automatically configure the DM9000A to take the maximum advantage of its abilities. The DM9000A also supports IEEE 802.3x full- duplex flow control.
General
01 Davicom General Layout Guide | 718.85 KB | |
02 Davicom Hardware Layout Guide | 9.4 MB | |
03 DACOM Ethernet Design-In Guide | 2.64 MB | |
04 Connecting two MII devices without transformers | 76.04 KB | |
05 Design hint Center-Tabs Transformer to PHY | 305.47 KB | |
06 Crystal Information | 58.87 KB | |
07 Programming Reference Flow-Chart | 130.04 KB |
MAC-PHY-Specific
11 DM90xx Comparison Table | 39.74 KB | |
12 DM90xx vs-SMSC LAN91xx-comparison | 13.26 KB | |
13 DM9000A-DM9000B Comparison | 45.1 KB | |
14 DM9000A-DM9000B Difference-List | 21.14 KB | |
15 DM9000A-DM9000B V112_Programming-Guide | 241.98 KB | |
16 DM9000A-DM9010 Layout Guide | 515.92 KB | |
17 DM9000B-DM9010B Layout Guide | 207.63 KB | |
18 DM9000BI-DM9010BI Layout Guide | 220.14 KB | |
19 DM9000-to-DM9000A-Changes | 4.53 KB | |
20 DM9000-DM9000A Driver-Programming-difference | 40.66 KB | |
21 DM9000-DM9000A-DM9010 comparison-list | 38 KB | |
22 DM9000-DM9000A-DM9010 SROM-programming-notes | 32.71 KB | |
23 DM9000-DM9010B Co-Layout | 26.75 KB |
Part-Specific
25 DM9000A Driver-for-WinCE-Installation | 2.91 MB | |
26 DM9000A ISA-8-bit-mode-PHY-Compatibility-Test-Report | 185.82 KB | |
27 DM9000A Performance-with-AU1200 | 179.47 KB | |
28 DM9000A Performance-with-AU1250 | 521.4 KB | |
29 DM9000A Settings-for-fiber-mode | 40.59 KB | |
30 DM9000A Application Note V121 | 228.99 KB | |
31 DM9000A Manual-to-TI-TMS320DM355 | 1 MB | |
32 DM9000A Schematic-to-TI-TMS320DM355 | 331.18 KB | |
33 DM9000A Migration-to-DM9000B | 96.26 KB | |
34 DM9000A Performance-with-STx71000 | 162.7 KB | |
35 DM9000A V20_Manual-EVB 8&16Bit | 188.79 KB | |
36 DM9000A V20_Performance-with-EM8511 | 107.17 KB | |
37 DM9000A EVB-8&16Bit-EMI | 35.75 KB |
DM9000A-DS-F01-030311 | 463.99 KB |
Software - General
41 DM90xx lnx-uboot | 4.89 KB | |
42 DM90xx WinCE-42-50-60-driver | 78.62 KB | |
43 DM90xx_ DM9ISADBG-Driver-for-WinCE42-50-60-Eboot | 15.01 KB | |
44 DM9000_JJ0 | 16.45 KB | |
45 DM9000 Linux Driver_KT3.9.0_R3 | 14.83 KB | |
46 DM9000-A-B V635_Linux-Driver | 11.67 KB | |
47 DM9000A-DM9000B V208_WinCE-50-60-Driver | 309.79 KB | |
48 DM9000A-DM9010 V250_dm9ks-linux-Kernel-24x-26x | 26.98 KB | |
49 DM9000-DM9000A-DM9010 Driver-for-WinCE-42-50-60 | 32.34 KB | |
50 DM9000-DM9000A-DM9010 V100_Diagnostic-for-LINUX-dm9k-diag | 7.75 KB |
Drawings - Part Specific
61 DM9000A-EVB-DSN-File | 90.17 KB | |
62 DM9000A-EVB-mit-EMI-PSpice | 133.05 KB | |
63 DM9000A IBIS-File | 11.07 KB |
Part-No. | Package | Temperature | Status | Remarks | Customs-Tariff-No. | MSL | Packaging |
DM9000AEP | LQFP-48 | 0° to 70°C | active | not recommended for new designs | 85423190 | 3 | 250/Tray |
81 Davicom ECN/PCN/EOL Policy | 15.43 KB | |
82 PCN Laser Marking | 246.76 KB |
83 DM9000A ECN_E4-to-E7 | 24.57 KB |
91 Soldering Conditions QFP and LQDP pb-free | 38.29 KB | |
92 Test Report LQFP pf-free | 100.41 KB | |
93 Test Report QFP pb-free | 33.4 KB | |
95 LQFP-100 Material Safety Datasheet | 2.45 MB | |
94 LQFP-48 Material Safety Datasheet | 442 KB | |
96 RoHS CoC 20170113 | 195.92 KB | |
97 SONY Green Partner approval | 3.21 MB |