DM9000B: MAC/PHY Controller mit ISA & 8/16 Bit Prozessor Interface
Features
• 48 pin LQFP Package
• current consumption 130mA + 40mA transformer
• 0.18 µm Process
• Integrated 10/100 Auto MDI-X Transceiver
• Up to 100MHz system clock
• compatible to IEEE802.3u
• IP/TCP/UDP checksum generation and checking
• supports Early TX
• 4k Dword SRAM
• Temperature Range: 0°C to 70°C and -40° to 85°C
• Integrated 3.3V to 1.8V converter
• Processor Interface: Byte/Word/Dword
• Wake-on-LAN (8 bit mode)
Block Diagam DM9000B
The DM9000B is a fully integrated and cost-effective low pin count single chip Fast controller with a general processor interface,a 10/100M PHY and 16K Byte SRAM. It is designed with low power and high performance process that support 3.3V with 5V IO tolerance.
The The DM9000B supports 8-bit and 16-bit data interfaces to internal memory accesses for various processors. The PHY of the DM9000B can interface to the UTP3, 4, 5 in 10Base-T and UTP5 in 100Base-TX with AUTO-MDIX. It is fully compliant with the IEEE 802.3u Spec.
Its auto-negotiation function will automatically configure the DM9000B to take the maximum advantage of its abilities. The DM9000B also supports IEEE 802.3x full- duplex flow control.
General
01 Davicom General Layout Guide | 718.85 KB | |
02 Davicom Hardware Layout Guide | 9.4 MB | |
03 DACOM Ethernet Design-In Guide | 2.64 MB | |
04 Connecting two MII devices without transformers | 76.04 KB | |
05 Design hint Center-Tabs Transformer to PHY | 305.47 KB | |
06 Crystal Information | 58.87 KB | |
07 Programming Reference Flow-Chart | 130.04 KB |
MAC-PHY-Specific
11 DM90xx Comparison Table | 39.74 KB | |
12 DM90xx vs-SMSC LAN91xx-comparison | 13.26 KB | |
13 DM9000A-DM9000B Comparison | 45.1 KB | |
14 DM9000A-DM9000B Difference-List | 21.14 KB | |
15 DM9000A-DM9000B V112_Programming-Guide | 241.98 KB | |
16 DM9000A-DM9010 Layout Guide | 515.92 KB | |
17 DM9000B-DM9010B Layout Guide | 207.63 KB | |
18 DM9000BI-DM9010BI Layout Guide | 220.14 KB | |
19 DM9000-to-DM9000A-Changes | 4.53 KB | |
20 DM9000-DM9000A Driver-Programming-difference | 40.66 KB | |
21 DM9000-DM9000A-DM9010 comparison-list | 38 KB | |
22 DM9000-DM9000A-DM9010 SROM-programming-notes | 32.71 KB | |
23 DM9000-DM9010B Co-Layout | 26.75 KB |
Part-Specific
25 DM9000B delay-time-on-x86-DOS-environment | 1.47 MB | |
26 DM9000B performance_EM851_v1 | 48.89 KB | |
27 DM9000B Signal-Quality-Improvement-at-EVB | 35.6 KB | |
28 DM9000B V01_WoL-under-16Bit-Mode | 89.34 KB | |
29 DM9000B V10_Driver-Installation-on-EM8511 | 48.89 KB | |
30 DM9000B V10_Driver-Installation-on-S3C6400 | 50.19 KB | |
31 DM9000B V10_Manual_EVB_8&16Bit | 189.76 KB | |
32 DM9000B V10_Performance-S3C6400-Linux | 300.77 KB | |
33 DM9000B V10_Performance-S3C6400-WinCE | 96.97 KB | |
34 DM9000B-to-S3C6400 | 42.84 KB | |
35 DM9000BI Ethernet-Conformance | 298.62 KB | |
36 DM9000BI V10_Manual-EVB-8&16Bit | 157.3 KB | |
37 DM9000Bx V13_8Bit&16Bit-Auto-MDIX | 49.8 KB |
DM9000B-DS-F03-04072014 | 419.79 KB | |
DM9000BI-DS-P02-032012 | 386.62 KB |
Software - General
41 DM90xx lnx-uboot | 4.89 KB | |
42 DM90xx WinCE-42-50-60-driver | 78.62 KB | |
43 DM90xx_ DM9ISADBG-Driver-for-WinCE42-50-60-Eboot | 15.01 KB | |
44 DM9000_JJ0 | 16.45 KB | |
45 DM9000 Linux Driver_KT3.9.0_R3 | 14.83 KB | |
46 DM9000-A-B V635_Linux-Driver | 11.67 KB | |
47 DM9000A-DM9000B V208_WinCE-50-60-Driver | 309.79 KB | |
48 DM9000A-DM9010 V250_dm9ks-linux-Kernel-24x-26x | 26.98 KB | |
49 DM9000-DM9000A-DM9010 Driver-for-WinCE-42-50-60 | 32.34 KB | |
50 DM9000-DM9000A-DM9010 V100_Diagnostic-for-LINUX-dm9k-diag | 7.75 KB |
Drawings - Part Specific
61 DM9000B_DM9000BI 16BIT_CKT | 107.85 KB |
Part-No. | Package | Temperature | Status | Remarks | Customs-Tariff-No. | MSL | Packaging |
DM9000BEP | LQFP-48 | 0° to 70°C | active | 85423190 | 3 | 250/Tray | |
DM9000BIEP | LQFP-48 | -40° to 85°C | active | 85423190 | 3 | 250/Tray |
81 Davicom ECN/PCN/EOL Policy | 15.43 KB | |
82 PCN Laser Marking | 246.76 KB |
91 Soldering Conditions QFP and LQDP pb-free | 38.29 KB | |
92 Test Report LQFP pf-free | 100.41 KB | |
93 Test Report QFP pb-free | 33.4 KB | |
95 LQFP-100 Material Safety Datasheet | 2.45 MB | |
94 LQFP-48 Material Safety Datasheet | 442 KB | |
96 RoHS CoC 20170113 | 195.92 KB | |
97 SONY Green Partner approval | 3.21 MB |