DM9102H: Single Chip PCI Fast Ethernet NIC Controller
Features
• 128 pin LQFP Package
• current consumption 130mA + 40mA transformer
• 0.18 µm Process
• Integrated 10/100 Auto MDI-X Transceiver
• Up to 100MHz system clock
• compatible to IEEE802.3u
• IP/TCP/UDP checksum generation and checking
• supports early TX
• 4k Dword SRAM
• Temperature Range: 0°C to 70°C and -40° to 85°C
• Integrated 3.3V to 1.8V converter
• Processor interface: Byte/Word/Dword
• SPI EEPROM interface
• MII and Reverse-MII interface
• Wake-on-LAN
Block Diagam DM9102H
The DM9102H is a fully integrated and cost effective single chip Fast Ethernet NIC controller. It is designed with low power and high performance process. It is a 1.8/3.3V device with 5V tolerance.
It provides direct interface to the PCI bus and supports bus master mode to achieve the high performance of the PCI bus. It fully complies with PCI 2.2. It is pin and software compatible to DM9102D. In the media side, the DM9102H interfaces to the UTP3, 4, 5 in 10Base-T and the UTP5 in 100Base-TX. It is fully compliant with the IEEE 802.3u Spec.
The auto-negotiation and HP Auto-MDIX function can automatically configure the DM9102H to take the maximum advantage of its abilities. The DM9102H also supports IEEE 802.3x's full-duplex flow control to prevent the receive overflow of link partner. The IPv4 IP/TCP/UDP checksum generation and checking can reduce the system CPU utilization.
Two different current saving mechanisms are integrated: The main mode is based on the OnNow Achitecture that is required for PC99. Alternative Modes is based on Remote Wake-on-LAN.
General
01 Davicom General Layout Guide | 718.85 KB | |
02 Davicom Hardware Layout Guide | 9.4 MB | |
03 DACOM Ethernet Design-In Guide | 2.64 MB | |
04 Connecting two MII devices without transformers | 76.04 KB | |
05 Design hint Center-Tabs Transformer to PHY | 305.47 KB | |
06 Crystal Information | 58.87 KB | |
07 Programming Reference Flow-Chart | 130.04 KB |
PCI General
Part-Specific
21 DM9102H IEEE test setup | 59.54 KB | |
22 DM9102H_EVB_EEPROM_content | 128 Byte | |
23 DM9102H_SCH-V11_Circuit_20090226 | 38.39 KB |
DM9102H-DS-F01-100710 | 540.75 KB |
Software
41 DM9102D_DM9102H_SW_QNX-Driver_20081209 | 31.78 KB | |
42 DM9102x_SW_Diagnostic-Program_20100610 | 211.43 KB | |
43 DM9102x_SW_lnx_Driver-V161 | 17.87 KB | |
44 DM9102x_SW-KT4.14_Linux_Automdix | 31.79 KB | |
45 DM9102x_SW-V220_Pgsrom_20100427 | 404.96 KB | |
46 DM9102x_SW-V306_WinCE-Driver-42-50-60_20070320 | 241.18 KB | |
47 DM91xx_SW-V2021000_Win-XP-Vista-7_20110224 | 69.84 KB |
Drawings
61 DM9102x_DWG_Orcad_20110912 | 29.02 KB |
Part-No. | Package | Temperature | Status | Remarks | Custom-Tariff-No. | MSL | Packaging |
DM9102HEP | LQFP-128 | 0° to 70°C | active | 85423190 | 3 | 90/Tray | |
DM9102HIEP | LQFP-128 | -40° to 85°C | active | 85423190 | 3 | 90/Tray |
81 Davicom ECN/PCN/EOL Policy | 15.43 KB | |
82 PCN Laser Marking | 246.76 KB |
91 Soldering Conditions QFP and LQDP pb-free | 38.29 KB | |
92 Test Report LQFP pf-free | 100.41 KB | |
93 Test Report QFP pb-free | 33.4 KB | |
95 LQFP-100 Material Safety Datasheet | 2.45 MB | |
94 LQFP-48 Material Safety Datasheet | 442 KB | |
96 RoHS CoC 20170113 | 195.92 KB | |
97 SONY Green Partner approval | 3.21 MB |